 |
 |
Knjige i monografije |
|
|
|
 |
Radovi u časopisima
i na konferencijama |
|
2011
Bobić I., Vencl A., Babić M., Mitrović S., Bobić B., Tehnološki postupak dobijanja dvojnog hibridnog kompozita sa osnovom od A356 legure aluminijuma uz dodatak 10 mas.% cestica SiC i 1 mas.% cestica grafita, Odluka Mašinskog fakulteta u Beogradu broj 902/3 od 09.06.2011. god., 2011
Živić F, Babić M., Mitrović S., Vencl A., Continuous Control as Alternative Route for Wear Monitoring by Measuring Penetration Depth during Linear Reciprocating Sliding of Ti6Al4V alloy, Journal of Alloys and Compounds, Vol.-, No.-, pp. -, ISSN 0925-8388, Doi DOI: 10.1016/j.jallcom.2011.02.158, 2011
I. Cvijovic-Alagic, Z. Cvijovic, S. Mitrovic, V. Panic, M. Rakin, Wear and corrosion behaviour of Ti–13Nb–13Zr and Ti–6Al–4V alloys in simulated physiological solution, Corrosion Science, Vol.53, No.2, pp. 796-808, ISSN 0010-938, Doi 10.1016/j.corsci.2010.11.014, 2011
Aleksandar Vencl, Saioa Arostegui, Gregory Favaro, Fatima Zivic, Mihailo Mrdak, Slobodan Mitrović and Vladimir Popovic, Evaluation of adhesion/cohesion bond strength of the thick plasma spray coatings by scratch testing on coatings cross-sections, Tribology International, Vol.-, No.-, pp. -, ISSN 0301-679, Doi 10.1016/j.triboint.2011.04.002, 2011
Miroslav Babic, Slobodan Mitrovic, Fatima Zivic, Effects of Al2O3 Particle Reinforcement on the Lubricated Sliding Wear Behavior of ZA-27 Alloy Composites, Journal of Materials Science, Vol.-, No.-, pp. -, ISSN 0022-2461, Doi JMSC22246, 2011
Branko Tadic, Djordje Vukelic, Janko Hodolic, Slobodan Mitrovic, Milan Eric, Conservative-Force-Controlled Feed Drive System for Down Milling , Strojniski vestnik - Journal of Mechanical Engineering Volume, Vol.57, No.7, pp. 425-439, ISSN 0039-2480, Doi 10.5545/sv-jme.2009.055, 2011
Živić F, Babić M., Cvijovic-Alagic I., Mitrović S., Vencl A., Wear Behaviour of Ti6Al4V Alloy Against Al2O3 Under Linear Reciprocating Sliding, Journal of the Balkan Tribological Association, Vol.17, No.1, pp. 3-13, ISSN 1310-4772, 2011
Miroslav Babic, Slobodan Mitrovic, Ilija Bobic, Rato Ninkovic, Influence of Heat Treatment on Tribological Properties of ZA-27 Alloy, The 4th World Tribology Congress 2009, Kyoto, Japan, 2009, 6 - 11, September, pp. J-213
Biljana Bobić, Slobodan Mitrović, Miroslav Babić, Aleksandar Vencl, Ilija Bobić, Corrosion Behaviour of the As-Cast and Heat-Treated Za27 Alloy, 12th International Conference on Tribology, Serbiatrib '11, Kragujevac, 2011, 11 – 13 May, pp. 91-97, ISBN 978-86-86663-74-0
Bobić, M. Babić, S. Mitrović, A.Venc, B. Bobić, Uticaj Temperature na Mehaničke Karakteristike Čestičnih Za27/Al2O3 Kompozita, 12th International Conference on Tribology, Serbiatrib '11, Kragujevac, 2011, 11 – 13 May, pp. 412-417, ISBN 978-86-86663-74-0
D. Kakaš, B. Škorić, P. Terek, L. Kovačević, A. Miletić, M. Vilotić, S. Mitrović, M. Babić, Influence of Sliding Speed and Surface Roughness on the Friction Coefficient and Wear of TiN Coatings Deposited at Low Temperature, 12th International Conference on Tribology, Serbiatrib '11, Kragujevac, 2011, 11 – 13 May, pp. 131-137, ISBN 978-86-86663-74-0
F. Živić, M. Babić, G. Favaro, M. Caunii, N. Grujović, S. Mitrović, Microindentation of Polymethyl Methacrylate (PmMa) Based Bone Cement, 12th International Conference on Tribology, Serbiatrib '11, Kragujevac, 2011, 11 – 13 May, pp. 336-341, ISBN 978-86-86663-74-0
Fatima Živić, Miroslav Babić, Slobodan Mitrović, Dragan Adamović, Nenad Grujović, Tribology in Biomaterials Design and Selection, 12th International Conference on Tribology, Serbiatrib '11, Kragujevac, 2011, 11 – 13 May, pp. 157-167, ISBN 978-86-86663-74-0
Milan Erić, Slobodan Mitrović, Fatima Živić, Marko Pantić, Application of Contemporary Information Technologies in Nanotribometry, 12th International Conference on Tribology, Serbiatrib '11, Kragujevac, 2011, 11 – 13 May, pp. 392-396, ISBN 978-86-86663-74-0
Miroslav Babić, Dragan Adamović, Slobodan Mitrović, Fatima Živić, Dragan Džunić, Marko Pantić, Tribological Properties of Shot Peened Surfaces of 36NiCrMo16 Alloyed Steels in Dry Sliding Condition, 12th International Conference on Tribology, Serbiatrib '11, , Serbia, 2011, pp, Kragujevac, 2011, 11 – 13 May, pp. 168-173, ISBN 978-86-86663-74-0
Slobodan Mitrović, Miroslav Babić, Blaža Stojanović, Nenad Miloradović,, Tribological Potencial of Hybrid Composites Based on Zinc ond Aluminium Alloys Reinforced with SiC and Graphite Particles, 12th International Conference on Tribology, Serbiatrib '11, Kragujevac, 2011, 11 – 13 May, pp. 138-145, ISBN 978-86-86663-74-0
Slobodan Mitrović, Miroslav Babić, Dragan Adamović, Fatima Živić, Dragan Džunić, Marko Pantić, Wear Behaviour of TiN Coatings for Cold Forming Tools under Dry Sliding Conditions, 12th International Conference on Tribology, Serbiatrib '11, , Serbia, 2011, pp, Kragujevac, 2011, 11 – 13 May, pp. 174-180, ISBN 978-86-86663-74-0
Tadić B., Jeremić B., Vukelić Đ., Mitrović S., Erić M., Development of Tribometer and Measurement Results of Static Coefficient of Friction Sliding and Coefficient of Rolling Friction by Principle Steep Plane, 12th International Conference on Tribology, Serbiatrib '11, Kragujevac, 2011, 11 – 13 May, pp. 397-402, ISBN 978-86-86663-74-0
2010
Babic Miroslav, Mitrović Slobodan, Živić Fatima and Bobić Ilija , Wear behavior of composites based on ZA-27 alloy reinforced by Al2O3 particles under dry sliding condition, Tribology Letters, Vol.38, No.3, pp. 337-346, ISSN 1023-8883, Doi 10.1007/s11249-010-9613-5, 2010
Biljana Bobic, Miroslav Babic, Slobodan Mitrovic, Nenad Ilic, Ilija Bobic, Milan T. Jovanovic, Microstructure and mechanical properties of Zn25Al3Cu based composites with large Al2O3 particles at room and elevated temperatures, International Journal of Materials Research (Zeitschrift für Metallkunde), Vol.12, No.101, pp. 1-8, ISSN 1862-5282, Doi DOI 10.3139/146.110425, 2010
ijmr-110425.pdf
Cvijović-Alagić I., Cvijović Z., Mitrović S., Rakin M., Veljović Ð., Babić M., Tribological Behaviour of Orthopaedic Ti-13Nb-13Zr and Ti-6Al-4V Alloys, Tribology Letters, Vol.40, No.1, pp. 59-70, ISSN 1023-8883, Doi DOI 10.1007/s11249-010-9639-8, 2010
D. Adamovic, M. Babic, M. Stefanovic, S. Aleksandrovic, Z. Golusija, S. Mitrovic, Tribological Model of the Ironing Process in Sheet Metal Forming for Lubricant Testing, Journal of Balkan tribological association, Vol.16, No.3, pp. 329-339, ISSN 1310-4772, Doi Ref. No. 752/15.07, 2010
Miroslav Babic, Slobodan Mitrovic, Dragan Džunic, Branislav Jeremic, Ilija Bobic, Tribological Behavior of Composites Based on Za-27 Alloy Reinforced With Graphite Particles, Tribology Letters, Vol.37, No.2, pp. 401-410, ISSN 1023-8883, 2010
Babic Miroslav, Mitrovic Slobodan, Jeremic Branislav, The Influence of Heat Treatment on the Sliding Wear Behavior of a ZA-27 Alloy, Tribology International, Vol.43, No.1-2, pp. 16-21, ISSN 0301-679, 2010
2009
Babic Miroslav, Aleksandar Vencl, Slobodan Mitrovic, Ilija Bobic,Influence Of T4 Heat Treatment On Tribological Behaviour Of ZA27 Alloy Under Lubricated Sliding Condition, Tribology Letters, Vol.36, No.2, pp. 125-134, ISSN 0301-679, 2009
D. Adamovic, M. Babic, Golusija, S. Mitovic, Tribological Model of the Ironing Process in Sheet Metal Forming for Lubricant Testing, Journal of Balkan tribological association, Vol.15, No.3, pp. 1, ISSN 1310-4772, Doi Ref. No. 752/15.07, 2009
D. Vidojevic, B. Jeremic, M. Babic, Availability Management of Complex Technical Systems, Strojniski vestnik - Journal of Mechanical Engineering, Vol.55, No.6, pp. 381, ISSN 0039-2480, 2009
D. Kakaš, B. Škoric, M. Babic, S. Mitrovic, A. Miletic, M. Vilotic, P. Terek, L. Kovacevic, Surface Roughness and Friction Coefficient in IBAD Deposited Tin Hard Coating, FME Transaction, Vol.37, No.2, pp. 83-86, ISSN 1451-2092, 2009
M. Babic, S. Mitrovic, R. Ninkovic, Tribological Potencial of Zinc-Aluminium Alloys Improvement, Tribology in Industry, Vol.31, No.1&2, pp. 15-28, ISSN 0354-8996, 2009
Bobic Biljana, Babic Miroslav, Mitrovic Slobodan, Jovanovic Milan T., Bobic Ilija, Comparison of rheological behavior between semisolid mixtures of ZA27 alloy and ZA27-AL2O3 composites, Metalurgija, vol. 15, no. 3, pp. 137-148, 2009
D. Kakaš, B. Škoric, S. Mitrovic, M. Babic, P. Terek, A. Miletic, M. Vilotic, Influence of Load and Sliding Speed on Friction Coefficient of IBAD Deposited TiN, Tribology in Industry, vol. 31, No. 3&4, pp. 3-10, 2009
I. Cvijovic-Alagic, S. Mitrovic, Z. Cvijovic, Π. Veljovic, M. Babic, M. Rakin, Influence of the Heat Treatment on the Tribological Characteristics of the Ti-based Alloy for Biomedical Applications, Tribology in Industry, vol. 31, No. 3&4, pp. 17-22, 2009
B. Bobic, S. Mitrovic, M. Babic, I. Bobic, Corrosion of Aluminium and Zinc-Aluminium Alloys Based Metal-Matrix Composites, Tribology in Industry, vol. 31, No. 3&4, pp. 44-52, 2009
Miroslav Babic, Slobodan Mitrovic, Ilija Bobic, Rato Ninkovic, Influence of Heat Treatment on Tribological Properties of ZA-27 Alloy, The 4th World Tribology Congress 2009, 6 - 11, September, Kyoto, Japan, 2009, J-213, 392
M. Babic, S. Mitrovic, R. Ninkovic, Tribological Potencial of Zinc-Aluminium Alloys Improvement, 11th International Conference on Tribology, SERBIATRIB '09, Belgrade, Serbia, 13-15 may, 2009
D. Kakaš, B. koric, M. Babic, S. Mitrovic, A. Miletic, M. Vilotic, P. Terek, L. Kovacevic, Surface Roughness and Friction Coefficient at IBAD Deposited Tin Hard Coating, 11th International Conference on Tribology, SERBIATRIB '09, Belgrade, Serbia, 13-15 may, 2009
F. Zivic, S. Mitrovic, M. Babic, I. Cvijovic-Alagic, Application of Tribometry in Investigations of Biomaterials, 11th International Conference on Tribology, SERBIATRIB '09, Belgrade, Serbia, 13-15 may, 2009
2008
A. Vencl, I Bobic, M. T. Jovanovic, M. Babic, S. Mitrovic, Microstructural and Tribological Properties of A356 Al-Si Alloy Reinforced with Al2O3 Particles, Tribology letters, Vol.32, No.1, pp. 159-170, ISSN 1023-8883, 2008
Bobic Ilija, Babic M., Mitrovic Slobodan, Bobic B., Jovanovic M.T, Rheological behavior of ZA27 alloy semi-solid slurries and Al2O3 particulate / ZA27 composite slurries, Tribology in Industry, Vol.30, No.1&2, pp. 47-54, ISSN 0354-8996, 2008
Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Bobic Ilija, Dzunic Dragan, Nanotribology investigations of composites based on Za-27 alloy reinforced by Al2O3 particles, Tribology in Industry, Vol.30, No.1&2, pp. 33-39, ISSN 0354-8996, 2008
Miroslav Babic, A. Rac, B. Ivkovic, 15. Years of the Serbian Tribology Society - origin and activities, Journal of the Balkan Tribological Association, Vol.14, No.-, pp. 3, ISSN 1310-4772, 2008
Miroslav Babic, A. Rac, B. Ivkovic, 15. Years of the Serbian Tribology Society - origin and activities, BALKANTRIB O8, 6th International conference on tribology, Sozopol, Bulgaria, 2008
Babic M., Adamovic D., Jeremic B., Mitrovic S., Tribological effects of shot peening surface treatment, 7th International Conference THE Coatings in Manufacturing, Kallithea - Halkidiki GR, 1-3 October, 2008
Babic M., Mitrovic S., Comparative tribological behaviours of hard and self-lubricating coatings deposited on heat treated steels, 7th International Conference THE Coatings in Manufacturing, Kallithea - Halkidiki - GR, 1-3 October, 2008
Bobic I., Babic M., Mitrovic S., Bobic B.and Jovanovic M.T., Rheological behavior of za27 alloy semi-solid slurries and Al2O3 PARTICULATE / ZA27 composite slurries, 7th International Conference THE Coatings in Manufacturing, Kallithea - Halkidiki GR, 1-3 October, 2008
Mitrovic S., Babic M., Živic F., Bobic I., Nanotribology investigations of composites based on za-27 alloy reinforced by Al2O3 particles, BALKANTRIB O8, 6th International conference on tribology, Sozopol, Bulgaria, 2008
Živic F., Babic M., Mitrovic S., Nanotribometer instrument as a tool for investigations in nanotribology, BALKANTRIB O8, 6th International conference on tribology, Sozopol, Bulgaria, 12-14 JUNE, 2008
Mitrovic S., Babic M.,Živic F., Bobic I., Nanotribološka ispitivanja kompozita sa osnovom od ZA-27 legure ojacane cesticama Al2O3, 32. Savetovanje proizvodnog mašinstva Srbije sa medunarodnim ucešcem, Novi Sad, 2008
živic F., Mitrovic S., Babic M, Uloga nanotribometrije u savremenim tribološkim ispitivanjima, 32. Savetovanje proizvodnog mašinstva Srbije sa medunarodnim ucešcem, Novi Sad, 2008
2007
Babic M., Ninkovic R., Mitrovic S., Bobic I., Influence of Heat treatment on Tribological Behavior of Zn-Al Alloys, 10th International Conference on Tribology, SERBIATRIB'07, Kragujevac, Srbija, 2007, 19-21. June
Babic M., Ninkovic R., Mitrovic S., Bobic I., ZA-27 Alloy Composites Reinforced with Al2O3 Particles, 10th International Conference on Tribology, SERBIATRIB'07, Kragujevac, Srbija, 2007, 19-21. June
Babic M., Ninkovic R., Mitrovic S., Bobic I., Tribological properties of composites with substrate made of the ZA-27 alloy reinforced by the graphite particles, 10th International Conference on Tribology, SERBIATRIB'07, Kragujevac, Srbija, 2007, 19-21. June
M. Babic, R. Ninkovic, S. Mitrovic, I. Bobic, Influence of Heat Treatment on Tribological Behavior of Zn-Al Alloys, Tribology in industry, Vol.29, No.1&2, pp. 23-31, 2007
M. Babic, S. Mitrovic, I. Bobic, Tribological Properties of Composites with Substrate Made of the ZA-27 Alloy Reinforced by the Graphite Particles, Tribology in industry, Vol.29, No.3&4, pp. 3-8, 2007
S. Mitrovic, M. Babic, I. Bobic, ZA-27 Alloy Composites Reinforced with Al2O3 Particles, Tribology in industry, Vol.29, No.3&4, pp. 35-41, 2007
2006
Miroslav Babic, Rato Ninkovic, Zn-Al ALLOYS - Tribomaterials applicable to power plant equipment maintenance, Symposium POWER PLANTS 2006, V. Banja, 2006, 19 - 22. 09.
Babic M., Ninkovic R., Mitrovic S., Bobic I., Uticaj termicke obrade na tribološko ponašanje Zn-Al legura, 31. Savetovanje proizvodnog mašinstva sa medunarodnim ucešcem, Kragujevac, 2006, 19-21. septembar
M. Babić, R. Aleksandar, R. Ninković, RAR ZN-AL legure - ležišni materijal za održavanje u železnici, XII NAUCNO-STRUCNA KONFERENCIJA O žELEZNICI sa medunarodnim ucešcem žELKON 06, Niš, 2006, 19. i 20. oktobar
Mitrovic S., Babic M., Bobic I., Tribološke karakteristike kompozita sa osnovom od ZA-27 legure ojacane cesticama Al2O3, 31. Savetovanje proizvodnog mašinstva sa medunarodnim ucešcem, Kragujevac, 2006, 19-21. septembar
Tadic B., Marjanovic N., Mitrovic S., Kinematic, Dynamic and Tribological Aspects of Up and Down Milling Processing, Tribology in industry, vol. 27., No. 1&2, 2006.
Marjanovic N., Tadic B., Ivkovic B., Mitrovic S., Design of Modern Concept Tribometer with Circular and Reciprocating Movement Tribology in industry, vol. 27., No. 1&2, 2006.
Rac A., Babic M, TRIBOTEHNICKE aktivnosti u održavanju tehnickih sredstava i održivi razvoj, Zeleznica NIS, ŽELKON 06, Nis, 2006, 19. i 20. oktobar
2005
Babic M., Oil monitoring and proactive mainentance, 9th Interntional Conference on Tribology, BALKANTRIB '05, Kragujevac, 2005, june 15 - 18, pp. 670-676
Babic M., Tribological properties of ground surfaces, WTC2005 World Tribology Congress III, Washington, D.C., USA, 2005, September 12-16
Bobic, R. Ninkovic, M. Babic, Structural and Mechanical Characteristics of composites With Base Matrix of Rar27 Alloy ReinforcedWithAl o and Sic Particles, 9th Interntional Conference on Tribology, BALKANTRIB '05, Kragujevac, 2005, 15 - 18. june
M. Babic, S. Panic, M. Zlatanovic, Tribological behavior of coated tools surfaces for metal powder sintering, 5th COATINGS, Kassandra-Chalkidiki in Greece, 2005, October 5-7, pp. 463-47
Tadic B., Babic M., Zivic F., Tribological aspects of machine tools electromotor propulsion selection, 9th Interntional Conference on Tribology, BALKANTRIB '05, Kragujevac, 2005, june 15 18., pp. 215-219
Babic M., Oil monitoring and proactive mainentance, Journal of the Balkan Tribological Association, Vol.11, No.3, pp. 409 - 418, 2005
Babic M., Sliding wear behavior of Zn-Al alloys in conditions of boundary lubrication, The Annals of University Dunarea de Jos of Galati Fascicle VII, Tribology, pp. 60-65, 2005
M. Babic, Effects of Machining Regime on Tribological Properties of Machined Surfaces, Tribology in industry, Vol.27, No.1 & 2, pp. 22-27, 2005
2004
Babic M., Jeremic B., Tribodijagnostika na osnovu dinamike procesa trenja, IBR 2004, Dijagnostika i ekologija, 2004, 24 - 28 maj
Babic M., Ninkovic R., Zn-Al Alloys as Tribomaterials, Tribology in industry, Vol.26, No.1 & 2, pp. 3-7, 2004
Bobic, R. Ninkovic, M. Babic, Structural and Mechanical Characteristics of composites With Base Matrix of Rar27 Alloy Reinforced With Al2O3 and SiC Particles, Tribology in industry, Vol.26, No.1 & 2, pp. 21 - 26,2004
Tadic B., Babic M., Zivic F., Energy saving by replacing machine tool motor propulsion, Tribology in industry, Vol.26, No.1 & 2, pp. 21 - 26, 2004
Babic M., Proactive oil monitoring in power plants, Power Plants 2004, V. Banja, 2004, 2- 5. Novembar
Babic M., Monitoring ulja za podmazivanje, IRMES 2004, Kragujevac, 2004, Septembar, pp. 67 - 73
Babic M., Jeremic B., Tribodijagnostika na osnovu dinamike procesa trenja, IBR 2004, Dijagnostika i ekologija, -, 2004, 24 - 28 maj
2003
Babic M, Lazic M., Principi definisanja alarma i limita stanja ulja u eksploataciji, Osma internacionalna tribološka akonferencija ITC, Beograd, 2003, 08 - 10 oktobar
Ninkovic R., Babic M., Rac A., Postupak dizajniranja kliznih ležaja od RAR legura, Osma internationa tribološka konferecija ITC 2003, Beograd, 2003, 08 - 10 oktobar
2002
Babic M, Ninkovic R, Rac, A., Tribološki aspekt primene Zn-Allegura za izradu mašinskih elemenata, IRMES 2002, Jahorina, 2002, 19-20 septembar, pp. 307 - 312
Ninkovic R., Babic M., Zn-Al Alloys as Tribomaterials, AITC 2002, Salerno, Italy, 2002, 18 -20. Semptember
Mitrovic S., A Proposition of the Constructive Solution for Improvement of Tribological Characteristics of Eccebtrically Loaded Slide Ways, Tribology in industry, vol. 23., No. 1&2, 2002.
Mitrovic S., Criterion Determination of Completely Worn Out Elements of Tribomechanical System on Extruders, Tribology in industry, vol. 23., No. 3&4, 2002
Nedeljkovic B., Trifunovic M., Nikezic S., Babic M., Composite with metal matrix on the basis of Cu-Zn alloy, Tribology in industry, Vol.24, No.1&2, pp. 29-33, 2002
Ninkovic R., Babic M., Tribološki aspekt dizajnirannja ležaja od RAR legura, Tribologija u industriji, Vol.-, No.3 i 4, pp. 22- 25, 2002
Babic M, Ninkovic R, Rac, A., Zn-Al legura RAR 27 iskustva iz istraživanja iz održavanja, YUMO 2002, Novi Sad, 2002, 22-24. maj, pp. 267 -276
Babic M., Monitoring ulja za podmazivanje kljuc održavanja, JUNG 2002, Novi Sad, 2002, 25 - 27 septembar
Ninkovic R., Babic M., Tribološki aspekt dizajnirannja ležaja od RAR legura, železnicko mašinstvo, Niš, 2002, 24. i 25. oktobar, pp. 213 - 217
2001
Babic M., Radojevic M, Radojcic M., Nakic M, Lubricant as a parameter of the tribo-mechanical system in the wire drawing process, WTC2001, Wiena, 2001
Babic M., Nature of the tribology-maintenance relation, Tribology in industry, Vol.23, No.1&2, pp. 21-27, 2001
Mitrovic S., Optimization of the Guiding System for Eccentrically Loaded Slide Ways, Tribology in industry, vol. 23., No. 1&2, 2001.
Rac.A., Babic, M. and Ninkovic, R., Theory and Practice of Zn-Al Sliding Bearings, Journal of the Balkan Tribological Association, Vol.7, No.3-4, pp. 234-240, 2001
Babic M., Priroda relacije tribologija-održavanje, Zbornik radova, XXV Jugoslovenski majski skup ODRžAVANjE INDUSTRIJSKIH POSTROJENjA, Beograd, 2001, 29 - 31. maj, pp. 236-245
2000
Ninkovic R., Babic M., Rac A., Yugoslav Zn-Al Alloys as Bearing Material, Tribology in industry, Vol.-, No.1 & 2, pp. 14-18, 2000
Radojevic M., Radojcic M., Nakic M., Babic M., Lubricant as Parameter of processing tribomechanical system in the process of wire drawing, Tribology in industry, Vol.22, No.1 & 2, pp. 23-27, 2000
Babic M., Rac A., Ninkovic R., ZnAl legure novi konstrukcijski materijal za tribološke komponente, IRMES 2000, Kotor, 2000, Septembar, pp. 64-70
Radojevic M., Radojcic M., Nakic M., Babic M., Mazivo kao parametar obradnog tribomehanickog sistema u procesu izvlacenja žice, Zbornik rada P-4, nagradjeni rad, YUNG 2000, br. 23., -, 2000, Oktobar, pp. 129-137
|
